ABRASION
RESISTANT STEEL
WINCO-TUF 40
Hi Strength Wear Plate, Quenched and Tempered
for Extreme Abrasion and Moderate Impact
WINCO-TUF 40 has excellent toughness at
high hardness and in heavy sections.
For severe abrasion.
Advantages
•
Maximum resistance to abrasion and impact.
• Withstands the brittleness
which develops at subnormal temperatures.
• Increased toughness and fatigue
resistance
• Retains high strength and
wearability at high temperatures.
• High impact and wear properties
retained at weld joints.
Physical Properties
Tensile Strength
200,000
PSI
Yield Strength
160,000
PSI
Elongation in 2″
14.4%
Reduction of Area
55%
Hardness
40-46 Rockwell “C”
Brinell
Min. 375-440
Typical Analysis
Carbon
.17/.25
Chromium
.45/.60
Manganese
1.50
Nickel
.70/1.00
Silicon
.50
Copper
.15/.30
Molybdenum
.20/.60
Phosphorus
.025 max.
Sulphur
.015
max.
WINCO-TUF
50
Ultra Hi Strength Alloy Wear Plate
Quenched
and Tempered, High Alloy Steel Is Intended Specifically for
Applications Requiring a High Degree of Abrasion and Wear Resistance.
Used by industries such as mining, forestry, quarrying, and
construction. WINCO-TUF 50 is the cost-effective choice for parts
subjected to extremely high levels of wear.
Physical
Properties
Tensile
Strength
210,000
PSI
Yield
Strength
180,000
PSI
Elongation
in 2″
12%
Hardness
48-53
Rockwell “C”
Brinell
Hardness
455-525
BHN
Typical
Analysis
Carbon
.31
Chromium
1.00
Manganese
1.50
Nickel
.70
Silicon
.55
Boron
.003
Molybdenum
.35
Phosphorus
.025
Sulphur
.015
Welding Instructions
WINCO-TUF
50 has superior welding characteristics. No specific electrodes are
needed — standard low-hydrogen, high-tensile rod is recommended for
maximum strength. E100XX, E110XX or E120XX or E130XX is preferred.
AR360,
AR400, AR450, AR500
IN
STOCK
|
